AirLink Communications RJ-11 Manuel d'utilisateur télécharger pdf (Page 13)

AirLink Communications March 2007 13

Connecting to a RADES Over Cellular Networks with AirLink Devices

Configuring the Host RJ-11 IP Gateway for the RSLINX

Host RJ-11 IP Gateway Defaults

• Phone port: 8 data bits, no parity, and 1 stop bit (8N1).

• Protocol: V.32bis.

• Maximum baud: 14400 baud .

• DHCP client: disabled.

• IP Address: 192.168.1.3.

Configuring the Host RJ-11 IP Gateway

FIGURE 19. Web Browser : Enter the Location

Connect the Host RJ-11 IP Gateway to power and connect the Ethernet cable from your computer

to the Host RJ-11 IP Gateway.

Open your web browser type “http://192.168.1.3:9080” (see the example in the screenshot

below) in the Address or Location bar and press the enter key.

Select Network Settings from the menu on the left.

RSLINX with a Host RJ-11 IP Gateway

http://166.213.236.221:9080

http:192.168.1.3:9080

1 2 ... 8 9 10 11 12 13 14 15 16

Pas de commentaire

AirLink Communications RJ-11 Manuel d'utilisateur Page 13