AirLink Communications RJ-11 Manuel d'utilisateur télécharger pdf (Page 6)

AirLink Communications March 2007 6

Connecting to a RADES Over Cellular Networks with AirLink Devices

The web-based interface will open. On the left side of the window are menu options. The central

area of the window is the working area (shown in the close up screen shots for the configuration

settings).

FIGURE 6. RJ-11 IP Gateway Interface

FIGURE 7. RJ-11 IP Gateway: Network Settings

In DHCP Mode, the RJ-11 IP Gateway will receive its IP address from the modem.

The IPv4 Address and the IPv4 Netmask should be listed as 0.0.0.0. (The current IP address and

current netmask listed above the entry boxes is received from the modem in DHCP mode. It is for

display only.)

Since many cellular carriers block the standard web browser ports (80 and 8080),

the RJ-11 IP Gateway uses 9080 by default as the port for the web-based interface.

Select Network Settings from the menu on the left.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Pas de commentaire

AirLink Communications RJ-11 Manuel d'utilisateur Page 6