AirLink Communications RJ-11 Manuel d'utilisateur télécharger pdf (Page 3)

AirLink Communications March 2007 3

Connecting to a RADES Over Cellular Networks with AirLink Devices

Configuring your Raven X for the RJ-11 IP Gateway

These steps are just a basic configuration to get you started and allow the Raven X to connect with

the RJ-11 IP Gateway. Refer to the user guide for more configuration options for specific environ

ments.

Default settings

• Management Interface IP Address: 192.168.13.31.

• Telnet and Wireless Ace password: 12345

• DHCP server: enabled.

• Public Mode - the IP Address assigned by the carrier is assigned to the RJ-11 IP Gateway.

Configuring the Raven X

A. Click on Connect.

B. Select UDP.

C. Type in the modem’s local IP (default is 192.168.13.31).

D. Type in the modem’s password (default 12345)

Note: While this application note covers installing an RJ-11 IP Gateway with a

Raven X, the RJ-11 IP Gateway is also designed to work with the Raven-E and any

other Airlink modem with an Ethernet connection, using the same configuration

outlined here.

Connect your Raven X directly to the Ethernet port on your computer and to power.

Start Wireless Ace and connect to your modem.

Start > All Programs > AirLink Communications > Wireless Ace 3G > Wireless Ace 3G

RADES with an RJ-11 IP Gateway and Raven X

1 2 3 4 5 6 7 8 ... 15 16

Pas de commentaire

AirLink Communications RJ-11 Manuel d'utilisateur Page 3