AirLink Communications Raven X HSDPA Guide de l'utilisateur télécharger pdf (Page 101)

Configuration Commands

Rev 2.0 Jul.09 94

Common

ThegroupsundertheheadingCommonencompassthose

commandsthatarecommontomostSierraWirelessAirLink

modems.Forexample,aRavenXorPinPointXwillinclude

groupswithserialrelatedcommands,however,theRaven‐E

willnot.

Misc (Miscellaneous)

Thecommandsofthe“Misc”groupareavarietyofcommands

thatdon’tdirectlyfitinothercategories.

Figure 1-3: AceManager : Misc

Enable Event Reporting = n

EnableordisableEventReporting,byselectingeither1‐Turn

onERor0‐TurnoffER.Ifyouchoosetoenable,clickonWrite

andthenRefreshalltoseealltheERfields.

• n=0:Disables

• n=1:Enables

+++

Note: +++ is not proceeded by

AT nor does it require a carriage

return (enter). There must be an

idle time (set by S50) on the

serial port before and after this

command.

ATEscapesequence.IftheRavenXEisinadatamode(any

modeotherthanPassThru),thiscommandcausesthemodem

tore‐enterATcommandmode.The“+”isASCII0x2B.

+++ is

not available in AceManager.



Tip: DAE=1 disables the +++ command.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 124 125

Pas de commentaire

AirLink Communications Raven X HSDPA Guide de l'utilisateur Page 101