AirLink Communications Raven X HSDPA Guide de l'utilisateur télécharger pdf (Page 105)

Configuration Commands

Rev 2.0 Jul.09 98

• pw=password(30charactersmaximum)

*NETPHONE?

Themodem’sphonenumber,ifapplica b leorobtainable.

•

*NETUID=uid

Theloginthatisusedtologintothecellularnetwork,when

required.

• uid=userid(upto64bytes)

*STATICIP=d.d.d.d

Setthe staticIPrequiredtobereceivedfromthenetwork.Ifthe

modemdoesnotgetthisIPaddressfromthenetwork,itwill

resettheinternalhardwareandtryagain.Thedefaultis0.0.0.0,

whichallowsanyIPaddressfromthenetwork.

• d.d.d.d=IPaddress

Example:

AT*STATICIP=192.168.1.23

Caution: STATICIP does not set the IP address of the modem, it

merely tells the modem which IP address to expect. If the expected IP

address is not granted while registering on the cellular network, the

modem will try to register on the network again until it receives that IP

address. If your account is set up for a dynamic IP address and you

set an address for *STATICIP, you may not be able to register on the

network at all since there is no guarantee you will receive the same

dynamic IP address again.

*STATUSCHK=n

ChecksifanSMSmessagehasbeenreceivedbythemodem.

• n=1‐255:Secondsbetweenchecks.

• n=0:Nevercheck.

*MODEMHISPEED

Settheinternalseriallinkspeedtotheinternal(radio)module.

• n=0:115200(default)

• n=1:230400

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 124 125

Pas de commentaire

AirLink Communications Raven X HSDPA Guide de l'utilisateur Page 105